Essential Tips: Data Recovery from a Damaged RAID 1 on Netgear ReadyNAS Duo RND2000

Learn how to recover data from a damaged RAID 1 configuration on the Netgear ReadyNAS Duo RND2000 in this comprehensive guide. Don’t let a damaged RAID 1 configuration compromise your data – watch now and take control of your storage system!

Essential Tips: Data Recovery from a Damaged RAID 1 on Netgear ReadyNAS Duo RND2000

Netgear ReadyNAS devices are quite fast and safe storage solutions. The manufacturer declares multiple levels of protection against data loss. To get the most out of this storage system, you should understand the available concepts of disk configuration.

This NAS uses the X-RAID data storage system by default, but it can also use the conventional storage system, also known as flex-RAID. Each storage type provides certain degree of reliability, but none can give you a 100 percent guarantee against possible data loss. Below, we’ll show you how to change the data storage type on this NAS, how to recover accidentally deleted data, and how to retrieve information from the damaged RAID.

Go to view
How to Recover Data from a Damaged RAID 1 on Netgear ReadyNAS Duo RND2000

How to Recover Data from a Damaged RAID 1 on Netgear ReadyNAS Duo RND2000

How to change from X-RAID to flex-RAID

As we mentioned earlier, this NAS uses X-RAID by default. In order to change to Flex-RAID, you should factory reset it, and then choose flex-RAID.

Also, you can change the RAID type in the settings of the Raidar utility. Remember that a factory reset clears all data and settings from your ReadyNAS system. For this operation, there is a dedicated Reset button on the NAS case. To factory reset the device, press it several times when it boots.

The Reset button on the back panel of Netgear ReadyNAS Duo RND2000

Otherwise, go to SystemUpdateFactory Default and click on Perform Factory Default, then FACTORY and Ok to confirm it.

System – Update – Factory Default – Perform Factory Default

Open the Raidar utility, choose your NAS from the list and click Setup. After that, check the box next to Flexible Volume and click Create volume. It starts the process of creating RAID.

ReadyNAS Volume Setup

When it’s over, the status Installing will change to Creating Volume and then to Booting. The operation was successful, and you have a new volume.

Booting status

Now let’s configure FTP access to the storage. To enable FTP server, go to ServicesStandard File Protocols, check the box next to FTP and click Apply.

Setting up FTP access with Standard File Protocols

How to add a shared folder and enable recycle bin feature

After all that, you can create a shared folder and set access permissions. To do it, open SharesAdd shares, give a name for the shared directory and click Apply.

Creating a shared folder

The next step is to configure security options for this folder. Open Share Listing and click Edit FTP access settings next to the new folder. Set access permissions and click Apply.

Setting access permissions for shared folder on Netgear ReadyNAS Duo RND2000

How to recover data from the Recycle Bin

For protection against accidental removal, this NAS lets you enable the Recycle Bin feature. The Recycle Bin in NETGEAR ReadyNAS is a function of CIFS (Common Internet File System) protocol. When it’s enabled, users can restore deleted files from the Recycle Bin, and the default time period for that is 10 days. When the Recycle Bin feature is active and your resources can be accessed under the CIFS protocol, deleted files are temporarily kept in the Recycle Bin, and after 10 days, they are removed completely. Also, deleted files can be removed if the shared directory is accessed via another protocol. Before recovery, make sure that this setting is enabled for your shared folder.

Enable the Recycle Bin feature for shared folder

Open SharesShare Listing, and click on the CIFS tab. Scroll down to see if the Recycle Bin option is active.

If it is, you will see a folder with the name “Recycle Bin” in the root directory of the shared resource that contains the deleted files. View and select the files you want to recover, and then right-click on them for recovery.

Recovering data from the Recycle Bin folder on Netgear ReadyNAS Duo RND2000

If the Recycle Bin is disabled, use a data recovery tool.

How to recover data from RAID0 NETGEAR

If you failed to retrieve the files from the Recycle Bin, and you have no backup to rely on, or the storage system is broken so the RAID has crashed so you can’t access the data, your information can still be saved with a data recovery tool. Download and install such program – Hetman RAID Recovery.

Recover data from damaged RAID arrays inaccessible from a computer.

It supports all popular file systems and RAID types, and it will automatically rebuild the damaged RAID with the available hard disks, so that you’ll be able to retrieve important data. To start the recovery process, take the drives out of the storage device and connect them directly to the motherboard of a Windows computer.

Take the drives out of the storage device

Bear in mind that before starting data recovery operations, you should prepare some free disk space with the capacity equal to the amount of data you’re planning to recover from your disk array.

If one of the hard disks breaks down, you can lose a part of your data, depending on the RAID level, and this data is impossible to recover. If you’re using RAID 0 and one hard disk is down, some information will be lost permanently. The matter is that this array type is meant for higher performance – which is achieved through striping. It means that data is written to either disk in parts which provides users with high input/output performance at a low cost. At the same time, though, it gives you no redundancy at all. So if that’s your case, be ready to face the bitter truth: you won’t be able to recover all your stuff.

When the hard disks are connected and the program starts, it will automatically scan the disks and rebuild the damaged RAID. The detailed information on your RAID system is displayed below.

Hetman RAID Recovery has rebuilt the array automatically

To search for deleted files, right-click on the volume and choose Open. After that, choose the scan type – Fast scan or Full analysis. If the NAS is down, but the program manages to rebuild the RAID correctly, a Fast scan is enough.

Fast scan

When the scan is over, open the folder where the lost files were stored. This program retains the entire structure and file names, so it will be easy to find the required items, and you can use the preview window to see their contents.

Select all the items you want to recover and click the Recovery button.

Specify where to save the data (choose the disk and folder), click Recovery and Finish. You will find the recovered files in the folder you have chosen.

Recovering data from Netgear ReadyNAS Duo RND2000

If the program can’t find the missing files after the Fast scan, then go for Full analysis. To do it, return to the main menu, right-click on the disk and choose “Analyze again.”

Full analysis

Select the file system type for this disk, and uncheck the box for Content-Aware analysis to accelerate the search process. Follow the instructions to complete the search.

Vladimir Artiukh

Author: , Technical Writer

Vladimir Artiukh is a technical writer for Hetman Software, as well as the voice and face of their English-speaking YouTube channel, Hetman Software: Data Recovery for Windows. He handles tutorials, how-tos, and detailed reviews on how the company’s tools work with all kinds of data storage devices.

Oleg Afonin

Editor: , Technical Writer

Oleg Afonin is an expert in mobile forensics, data recovery and computer systems. He often attends large data security conferences, and writes several blogs for such resources as xaker.ru, Elcomsoft and Habr. In addition to his online activities, Oleg’s articles are also published in professional magazines. Also, Oleg Afonin is the co-author of a well-known book, Mobile Forensics - Advanced Investigative Strategies.

Recommended For You

Hello! This is AI-based Hetman Software virtual assistant, and it will answer any of your questions right away.
Start Chat