RAID Reconstruction: Failed Arrays and Rebuilds

Explore how to reconstruct RAID configurations, determine array parameters and retrieve files after failed rebuilds, controller failures or migrations.

How to recover data from Synology NAS after a failure during migration from RAID 1 to RAID 5?

Imagine that you add a drive to a Synology NAS and start migrating from RAID 1 to RAID 5 to increase storage capacity. But during the rebuild, power is suddenly lost and the NAS shuts down. After power is restored, it turns out that one of the original drives is no longer detected, and there is no access to the files. What should you do if there is no current backup of the required data? Can files be recovered from the two surviving drives when the migration to the new RAID level was never completed?

(more…)

How to Rebuild Data Disks in Unraid 7.3.1: Single and Dual Parity

In this article, we will examine critical data loss scenarios on servers running Unraid OS, specifically reliable data recovery from Single Parity and Dual Parity array configurations. We will look at how to correctly connect the server’s physical drives directly to a computer and prepare them for safe scanning. We will apply specialized approaches to reconstructing damaged arrays and recovering files depending on the number of functioning disks remaining.

(more…)

Expanding RAID 5 Without Data Loss: Adding Drives on Controllers, NAS, Linux

In this tutorial, we'll walk you through the process of adding more drives to an existing RAID 5 array without risking any data loss. Whether you're using a hardware controller, NAS, or Linux-based system, this guide will provide you with the necessary steps to expand your storage capacity safely.

(more…)

Replace Dead RAID Controller Without Losing Data: Easy Guide!

Need to replace a dead RAID controller without losing data? Our comprehensive guide has got you covered! Learn step-by-step instructions and expert tips for successfully replacing your RAID controller without risking data loss. Say goodbye to data loss worries and hello to a seamless replacement process!

(more…)

Convert LV or MD RAID1/0 to RAID5: Data-Safe Methods

In this tutorial, we walk you through the step-by-step process of converting LV or MD RAID1/0 configurations into RAID5 seamlessly (on Linux, with mdadm or LVM). From understanding the prerequisites to executing the conversion safely, we provide practical tips and expert guidance to ensure a smooth transition while preserving your valuable data intact. Whether you're a sysadmin or a tech enthusiast, this article equips you with the knowledge and tools to upgrade your RAID setup with confidence.

(more…)