Data Recovery from My-Ditto NAS RAID System: Step-by-Step Instructions!

Discover how to recover data from a RAID system on My-Ditto NAS with our essential guide. Whether you’ve encountered data loss due to hardware failure or other issues, this step-by-step tutorial will walk you through the process of recovering your valuable data from My-Ditto NAS RAID system with ease.

Your browser does not support HTML audio, but you can still download the file.

Network storage devices by Dane-Electronic are marketed as NAS solutions that don’t need complicated configuration procedures. To improve data storage reliability, this NAS can build RAID 1 arrays. In this case, all data written to one hard disk will be copied to the other disk as well. This will protect your data against loss. Still, just like any other storage device, a NAS may break down sooner or later. As a result, all files still remaining on the disks will automatically become inaccessible.

When connecting disks to a PC, it is not always possible to see the data that which is stored on them due to a mismatch of the file system or the RAID data writing method. The operating system may not recognize the disks and when they are connected, it may suggest initializing of formatting them for further use. In this case, you’ll need a data recovery tool to read and recover your files from the RAID.

How to build a RAID on My-Ditto

For starters, let’s explore how to create a RAID system on this storage device. To manage hard disks, you need to access the administration panel of the NAS device. Open a web browser and enter the IP address of your NAS. Type the default login and password – they are admin and 1234, respectively.

After that, go to the Tools section and find the tab Storage Tools. Check this option – Enable RAID, then choose the array type and click Apply to confirm.

As a result, you’ll see a warning saying that all data will be erased from the disks. Click Ok to continue. It starts the process of building the RAID, so you’ll have to wait a little until it’s over. In the Storage Status tab you can view the disk array status.

By now, you’re finished with the settings and the storage device can be used, so you can write files to the hard disks and so on.

How to recover data from a RAID based on my-Ditto NAS

If the storage device breaks down and you can’t access the disk array anymore, the RAID can still be rebuilt and files can be retrieved with the help of a data recovery tool called Hetman RAID Recovery.

In case of a NAS storage breakdown, the information stored on the hard disks remains intact, but if the disks are connected directly to a computer, the operating system may not recognize them. As a result, you won’t be able to access the files stored on the disks. That is why you will need a software tool capable of rebuilding the damaged disk array and retrieving your files.

Hetman RAID Recovery supports most popular file systems and RAID types. It will come in handy if you lose access to data stored on a network-attached device as a result of a hardware error, a controller failure or other hardware issues. It will help you recover data after a device breakdown, accidental removal, formatting, misconfiguration or NAS firmware issues.

To access the disks, they need to be taken out of the NAS device and connected to a computer directly. This computer has to be a Windows machine. If the operating system of this computer suggests initializing or formatting the disks, don’t do that because it will make recovery a lot more complicated.

Instead, download, install and run Hetman RAID Recovery. When started, the program will automatically scan the disks connected to this computer, rebuild the damaged RAID system and display it in the main window. In my case, the program was able to detect the RAID type which was built with these disks.

To search for files, right-click on the array and choose Open, then select the scan type. We recommend beginning with a Fast scan – this will take less time, and it works fine in most typical recovery scenarios.

But if the program can’t find the missing files, then go for Full analysis. Go back to the main window, right-click on the disk and choose Analyze again, then click on Full analysis, select the file system for this disk, and click Next.

The program has easily found all the information that used to be stored on the disks. You can use the preview window to see the contents of all files. Select the files you want to restore, and click the Recovery button. Specify where to save the data (choose the disk and folder), and click Recovery again.

When the operation is over, you will find the data in the folder you have chosen.

Conclusion

Summing up, it’s not too difficult to recover data if your storage device is down. The most important thing is to understand what to do and choose a good software tool able to restore your files from the disks.

Author: , Technical Writer

Vladimir Artiukh is a technical writer for Hetman Software, as well as the voice and face of their English-speaking YouTube channel, Hetman Software: Data Recovery for Windows. He handles tutorials, how-tos, and detailed reviews on how the company’s tools work with all kinds of data storage devices.

Editor: , Technical Writer

Oleg Afonin is an expert in mobile forensics, data recovery and computer systems. He often attends large data security conferences, and writes several blogs for such resources as xaker.ru, Elcomsoft and Habr. In addition to his online activities, Oleg’s articles are also published in professional magazines. Also, Oleg Afonin is the co-author of a well-known book, Mobile Forensics - Advanced Investigative Strategies.

  • Updated:
  • Evaluations:
  • 6
  • /
  • :

Share

Questions and answers

What are the common causes of data loss in My Ditto NAS RAID Arrays?

  1. Human Error: Accidental deletion of files, incorrect configuration, and accidental formatting of the RAID array can all lead to data loss.
  2. Hard Drive Failure: When a hard drive fails, the data stored on it may become inaccessible or lost.
  3. RAID Controller Failure: If the RAID controller fails, it can cause data corruption or data loss.
  4. Power Outages: Sudden power outages can cause data corruption or loss.
  5. Firmware Issues: Firmware issues can cause data corruption or loss.
  6. Physical Damage: Physical damage to the drives or the RAID array can cause data loss.

Can a failed hard drive cause data loss in a My Ditto NAS RAID Array?

Yes, a failed hard drive can cause data loss in a My Ditto NAS RAID Array. RAID arrays are designed to provide redundancy and protection against data loss, but if one of the hard drives fails, the data on that drive may be lost.

What steps should be taken to avoid data loss in a My Ditto NAS RAID Array?

  1. Ensure that the NAS RAID Array is configured correctly. Verify that the RAID level is set correctly and that the drives are properly connected and formatted.
  2. Regularly check the health of the NAS RAID Array. Use software such as NAS Health Check to monitor the status of the array and ensure it is functioning properly.
  3. Backup important data. Utilize a backup solution to create regular backups of important data stored on the NAS RAID Array.
  4. Use a redundant array of independent disks (RAID) configuration. Utilize a RAID configuration such as RAID 5 or RAID 6 to ensure data is protected in case of a drive failure.
  5. Monitor disk usage. Monitor disk usage to ensure there is enough free space on the NAS RAID Array to prevent data loss due to over-filling.
  6. Use a UPS system. Connect the NAS RAID Array to an uninterruptible power supply (UPS) system to protect against unexpected power outages.

What are the different types of RAID levels used in My Ditto NAS RAID Arrays?

The different types of RAID levels used in My Ditto NAS RAID Arrays are:

  1. RAID 0 (Striping): RAID 0 combines multiple hard drives into one logical drive, providing increased performance and capacity.
  2. RAID 1 (Mirroring): RAID 1 creates an exact copy of the data on two or more hard drives, providing redundancy and increased data security.
  3. RAID 5 (Parity): RAID 5 distributes parity information across all the drives in the array, allowing for redundancy and improved performance.
  4. RAID 6 (Double Parity): RAID 6 adds an additional layer of parity protection, providing even greater redundancy and data security.
  5. RAID 10 (Striped Mirrors): RAID 10 combines the performance of striping with the redundancy of mirroring, providing both increased performance and data security.

How does RAID 0 work in a My Ditto NAS RAID Array?

RAID 0, also known as "striping," is a type of RAID configuration that uses multiple hard drives to create a single, larger virtual drive. In a My Ditto NAS RAID Array, RAID 0 is used to increase the capacity and performance of the system by writing data across multiple drives in parallel. This allows for faster read/write speeds and greater storage capacity than if the same data were written to a single drive.

Comments (11) #

  • Ernest Popham 29.03.2023 03:24 #

    How can a professional data recovery service recover data from a physically damaged My Ditto NAS RAID Array?

    • Hetman Software 29.03.2023 03:44 #

      A professional data recovery service can recover data from a physically damaged My Ditto NAS RAID Array by using specialized tools and techniques to extract data from the damaged drives. This may include imaging the drives, replacing faulty components, repairing firmware issues, and recovering data from the RAID array. The data recovery service will then analyze the recovered data and determine the best course of action to restore the data. Depending on the severity of the damage, the data recovery service may need to use advanced techniques such as head replacement, sector-by-sector reconstruction, and other methods to recover the data.

  • Ben Glancey 29.03.2023 00:20 #

    What are the key benefits of using a professional data recovery service to recover data from a My Ditto NAS RAID Array?

    • Hetman Software 29.03.2023 00:48 #

      1. Experienced Professionals: Professional data recovery services employ experienced technicians who have the expertise to quickly and safely recover data from a My Ditto NAS RAID Array.
      2. Advanced Technology: Professional data recovery services use advanced technology and specialized tools to ensure the best possible recovery of data from a My Ditto NAS RAID Array.
      3. Secure Environment: Professional data recovery services provide a secure environment where data can be recovered without any risk of further damage or loss.
      4. Cost-Effective: Professional data recovery services are often more cost-effective than trying to recover data yourself.
      5. Timely Results: Professional data recovery services are able to provide timely results and can often recover data faster than if you attempted to do it yourself.
  • Robert Speakes 28.03.2023 22:33 #

    Can a data recovery software be used to recover data from a My Ditto NAS RAID Array?

    • Hetman Software 28.03.2023 22:50 #

      Yes, a data recovery software can be used to recover data from a My Ditto NAS RAID Array. However, you should be aware that the success of the data recovery process depends on the severity of the data loss and the type of RAID array used. It is recommended to seek professional help if you are not familiar with the process.

  • Art Anstey 28.03.2023 20:33 #

    What is the process of recovering data from a My Ditto NAS RAID Array?

    • Hetman Software 28.03.2023 21:07 #

      1. Power down the My Ditto NAS RAID array and connect it to a computer with a SATA cable.
      2. Use data recovery software to scan the RAID array for recoverable files.
      3. Select the files you want to recover and save them to a separate drive or external storage device.
      4. If the data recovery software does not work, you may need to use a professional data recovery service to attempt to recover the data from the RAID array.
  • Walker Soward 28.03.2023 16:25 #

    What are the advantages of using RAID 5 in a My Ditto NAS RAID Array?

    • Hetman Software 28.03.2023 16:54 #

      1. Increased Reliability: RAID 5 utilizes disk striping with parity, which allows it to provide data redundancy and fault tolerance. This means that if one disk fails, the data can still be accessed from the remaining disks.
      2. Improved Performance: RAID 5 also utilizes disk striping, which increases read and write performance by spreading the load across multiple disks.
      3. Cost Savings: RAID 5 requires fewer disks than other RAID levels, making it a cost-effective solution for data storage.
      4. Flexibility: RAID 5 is a flexible solution that can be used for both large and small storage needs. It can also be easily expanded by adding additional disks.
  • Hetman Software 20.03.2023 15:16 #

    If you have any questions about recovering data from a RAID system on My-Ditto NAS, or about doing it with the help of other apps, leave a comment to ask us.

Post comment

Recommended For You